CREDIT DOT

Mapping pinball trends for the casual enthusiast…

MODS: Lighting up Demo Man

1 Comment

00-demog00

As a follow-up to yesterday’s interview with Art from Comet Pinball LED, I’d like to share a modification I made to my Demolition Man using Comet’s products.

There are two plastic girders that run along the top of the backboard of the game that sit dark 95% of the time despite having transparent blue plastic worked into their design. This is an area begging to be lit up. There are three flashers back there…but their use is limited, leaving the plastics dark most of the time.

00-demog02

The area in question: the two girders that run along the back of the game.

In a recent Demolition Man refurb video by TNT Amusements, they drilled out an extra four or five holes in the backboard and install individual sockets so that superbright LEDs could be placed in there. This option makes for a very centralized and spotty lighting effect as you can see in the picture below.

00-demog01

TNT Amusements attempt at lighting the same area with single super-bright LEDs.

I picked up a few SMD light strips from Comet LED (a steal at $2.95USD per strip, available in both 3- and 7-SMD versions in a variety of colours available here). I hoped this would give the light more wash, rather than the centralized throw found in TNT’s modification of the game.

00-demog03As you can see from the image at right, each SMD strip comes complete with three different female ends, depending on how you want to hook up the lights. This also makes for less of a destructive footprint when drilling out the backboard: you need only drill a hole large enough to feed the male lead of the wire through, rather than having to feed an entire socket through. I went with Comet’s blue SMD strips…but I suppose white would have worked as well, as the transparent plastic already had a blue hue. I wired up the lights for each plastic girder to one common lead as seen in the photo below. The smaller left girder was lit using two 3-SMD strips, and the larger right one (pictured below) was lit using two 7-SMDs and one 3-SMD.  The strips can also be trimmed to any length needed.  No permanent modification to the original plastic pieces themselves needed to be done…the SMD stips come with adhesive backing.  Just make sure the area is clean before affixing the strips.  I attached them to the inside top of the grey plastic allowing the SMD glow to shine downward rather than directly at the player.

 

00-demog04

With a common lead for each, I needed only drill two holes in the backbox to feed the female lead through. Once fed through, I attached the male 47-bulb style end. To keep things tidy, I wired in two extra sockets off of the general illumination string that lights up the rear portion of the playfied (which are also mounted to the backside of the backboard). Leads plugged into the sockets and voila…a nice subtle blue glow to the upper rear of the playfield.

00-demog05

The final product with a beautiful blue hue.

I find it matches the overall “blue-ness” of the game, and makes for a great contrast against the red lights of the ACMAG and Cryo-Claw. Even with the area being constantly lit, the flashers still have a descernable effect when they are activated.  The strip lighting is extremely versatile and the price point cannot be beat.  These subtle lighting mods are a great way to make old games looking fresh.  Check back for more lighting modifications using Comet Pinball LED products in the future.

Advertisements

One thought on “MODS: Lighting up Demo Man

  1. Looks ‘factory’! Very nice!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s